Hobbytown USA Annual Model Contest

What does Bruce Lee have to do with trains?  Everything.  More of that in a minute...

Yesterday my Mill Pond diorama won it's class (dioramas) at our local Hobbytown USA. I am pretty happy about that. I got a nice plaque, for the low price of three dollars (entrance fee).  More importantly, I got to see an old friend, and I got a chance to see models that ran the spectrum of very good, to very, very, bad.  Before you get a bad taste in your mouth for me "gloating", hear me out.  Even those really crappy models were on display, and I didn't see any of YOU there.  The people who had the balls to come out and compete are all winners, because they took time out of their day to at least show up, with glue runs, finger prints, and duct tape shadowboxes in tow, to share their hobby with others.

 As Model Railroaders, we kind of hang out with the other weirdos like us.  My friend today said: "ever notice that model builders are strange?"  Well, of course I had noticed, look at the two of us here!  We tend to be basement, garage, or attic dwellers, total geeks. Getting out to a contest or show to socialize with the other socially retarded folks is good for you, and competition is healthy. It also gives you ideas, and a chance to get to know other people who share your interests. 

What did I gain from looking at bad models? I got some inspiration to maybe try other genres of modeling. There were good ideas, just maybe not executed the best way.  Unfortunately, I couldn't really hang out and talk with all of the modelers, because I would have liked to give some of those guys some tips or ideas, and maybe I could have gotten some tips on my own modeling, and maybe those guys could have pointed out things that I could have done better that I missed.

Enough of the lecture. Here are some photos of my diorama.

So... Bruce Lee?  Did you watch the video? If I told you I am good, you would say that I am gloating. If I told you I am no good, you know I'm lying.  Become like water, and flow.

Go build something awesome.

Devil in the details

I'm now at the point in the diorama build where the nits come out to pick. I placed the logs in the pond, and now I just need to detail the scene a little. Saturday is the contest, and I'm pretty happy with what I have been able to accomplish in just under 3 weeks (to date). 

I still have too many projects, and too little time, for example:

* half a dozen HOn30 freight car kits to assemble

* On30 shay conversion

* On30 Porter rebuild (two of those)

* On30 Davenport detailing

* finish an HOn30 Porter

* finish my Mining micro in On30

* Buzzards Cove HOn30 micro layout

* finish the masters for my flat car kit

And...

This little guy. An HOn30 Forney kit, from Five79. While that is a pretty straight forward build, just like everything I do, I am over-complicating it by adding Radio Control. At least, that is the plan anyway. It's going to require me to get over my electronics mental block. 

I should probably start RC with an easier project, like one of the Porters in On30, and I may still, because I should be able to get this bugger running well  with the addition of a flywheel, and a conductive rear truck. I'm going to head to the Mid Atlantic Narrow Gauge Guild's annual module meet in Kimberton, PA in a few weeks to talk to the RC gurus of On30 to get some help, and maybe go from there.  

I'm not going to let this stuff stop me though, I'll just do what Dad taught me on my way to the Fort Benning School for Wayward Boys: "Just put one foot in front of the other."

Go build something awesome.

Patton said

"A good plan now is better than a perfect plan too late". Okay, so I am paraphrasing a bit, but they are good words to live by. On the 29th of March, the local Hobby Town USA is hosting their spring model contest, and I am entering a Diorama.  I started it March 3rd, so I'm under a bit of a time crunch, and I hadn't planned a diorama to build! 

I could be freaking out that my plan isn't exactly what I wanted it to be, or that I don't have enough time to add in all the details I want. I have had to dump a portion of the diorama (a log dump coincidentally) in order to have enough time to build the background wall (pictured). I didn't even know what I wanted the wall to look like, or what it represents. That would have stopped me a year ago. I can't stress about it now. I am under a time hack, and I have too much else to worry about. 

I think many of us stress too much about making sure everything is perfect in out modeling, and perhaps in our lives. Modelers are detail oriented by nature, and are easily stopped when a detail isn't  exactly as we want them to be. 

Nothing is perfect, so quit kidding yourself.  

Being driven toward perfection is an admirable quality, only if you know when to accept imperfections and move forward, otherwise, you will never accomplish anything, or worse yet, you will never start toward anything. 

Now,

Go build something awesome.

Dead Rail?

Over the last few days, I have been contemplating some pretty deep stuff, like:

Why do we drive on parkways, and park on driveways?
When is it okay to tell a person they have a hanging booger?
What makes an "innie" into an "outie"?

But the biggest question I have is:

Why do I get so frustrated building layouts?

I have the answer: I hate wiring. Hate is a pretty strong word, and I don't just hate wiring, I hate everything electrical.  Loathe it.  It's probably because I don't understand it, and that pisses me off. I could dive into books and websites and teach myself everything about electrical engineering I could ever want to know, but that would take time away from what I love, which is building, detailing, and weathering models. I'm not willing to do that. My modeling time is limited as it is, and I couldn't care any less to waste energy on the flow of electrons, amps, watts, ohms, and volts. 

Enter a few guys on the internet.

"Convert those locos to battery powered RC, and never worry about electrical again!" they said.  No worrying about any of the garbage anymore.

Well, I'm thinking about it, and I'm trying to figure out whether or not I can shoehorn RC gear into HOn30 locomotives, or if I'll have to run cheater cars with them.  The current (and only) HOn30 locomotive on the roster is a Railway Recollections Porter, which will probably not have the room for gear, without a cheat car. (a cheat car is a piece of rolling stock that is permanently connected to the locomotive that hides all the RC gear, It used to be pretty common for N scale guys to run cheaters with small steam locomotives).  I'm waiting on an order from Parkside Dundas to ship of a Five79 2-4-4 Forney that will go over an old Bachmann 0-4-0 mech, that are notoriously bad runners, mostly because of poor electrical connections (sounds like a candidate for RC). The Forney might have enough room in the cab and bunker to house the receiver and batteries. Once I get the kit, I'll be scrutinizing it thoroughly.

In the mean time, my Porters and lone Davenport in On30 would be able to run RC with one of my gondolas set up as an auxiliary tender (cheat car).  From what I can see, it doesn't look like costs would be much different than converting to DCC. 

Never having to clean track? Now that would be Awesome.

Who says Skeletons have to stay in the closet?

16' Shorty Skeleton Kit

 

Your short line needs some way of getting timber to the mill, enter the Shorty Skeleton. At 16' long, and 6' wide, this little bugger of a buggy will negotiate 12" radius turns on your backwoods layout. With the addition of your own preferred trucks and couplers, this little guy is ready to go. As a craftsman kit, some special tools are required, along with a moderate amount of patience and skill.

Contents of the kit

Kit includes everything seen in the picture. You will need to add your own trucks and couplers. I used Kadee #501 trucks and Grandt Line link and pin couplers for the model above. You'll also need an assortment of standard modeling tools, as well as a 2-56 Tap and a #43 drill bit.

Stay tuned for a how-to on my techniques for weathered wood, and rusty metal.

Go build something awesome.

Quantity

1 Kit $18.00 USD 2 Kits $35.00 USD 3 Kits $50.00 USD 4 Kits $60.00 USD

Late to the party

Skeleton kit with girly chain

I'm sure I'm not the first person to think of this, and while I may be late to the party, I prefer to think of myself as being fashionably late. Fashion isn't something that I'm necessarily known for, with my combat boots, and realtree hat, but I digress...

Yesterday I was returning a product to AC Moore (Castn Craft mold release...don't buy it...it sucks) and since I had time, I figured I would "drip" around and see if I could find anything useful, and I did. In the bead/jewelry section I found myself very much out of place among tween girls and aging hippies, but I found chain. It's a little over scale, at about 14 LPI, with links scaling to around 4" long, but I didn't see anything smaller. It was $4.49 for 2 meters (6.5 feet), which is cheaper than 1 foot of chain from a model railroad supplier. Of course, it's shiny which won't do for us, so I dipped it in PCB Etchant for about an hour, and then dunked the whole works in a mason jar full of clean water. When it dried off (on a paper towel) it turned into a beautifully rusted pile of junk. The results can be seen in the picture. The more orange chain is how it looks coming out of the bath. 

While some people may say the rusted chain looks great, and I won't argue with that, it doesn't look like a chain that is used all day, every day. Iron chain that sits in your shed without oil will look like that, or maybe just a tad redder, but chain that is used constantly doesn't have lots of surface rust. So, I hit the chain with some odorless oil thinner (the kind artists use) and applied black, dark red rust, and dark earth colored Bradgon Weathering Powders.

Whether or not you choose to use girly fashion chain is up to you, but "Black" chain is just about as unrealistic as "Bling".

Go build something awesome

Almost Ready...

First casting gets painted and weathered

 

If you've been following along on Facebook, you'll know that I've made molds for an On30 skeleton log car, 16' long. It's of no specific prototype, like many backwoods logging cars. The picture above is an actual casting that is in the process of paint and weathering. I'm sorry for the quality of the photo, I take a lot of pictures with my iPhone, when I don't want to get the camera out.


I've been asked if it will come with chains.  The short answer is no, not now. The long answer is: If I can get a supplier of scale chain where I am not paying retail (read $6 per foot) I will eventually add them in, for an increased price. I know that's not what you probably want to hear, but facts are facts, and while I have been told that I'm a nice guy, I'm not going to give these away. At least I'm honest!

 

My goal is to provide affordable kits that are as highly detailed as possible, so some trade offs have to occur, and right now, chains are too expensive for me to provide customers without significantly increasing the price of the model, and I'm not willing to do that. I want to sell these things, so I can afford to produce other kits, and finance my own expensive hobby! 

Pre-orders of these kits will be open by the end of the week. I say pre-order, because if you all like these as much as I do, I have a feeling I'll develop a backlog rather quickly, and I don't want to get people's expectations up on being able to ship them immediately.

Now,

Go build something awesome. d